Premium RGB scart cable for Sega Mega Drive I - Megadrive
  • Premium RGB scart cable for Sega Mega Drive I - Megadrive
  • Premium RGB scart cable for Sega Mega Drive I - Megadrive

Premium RGB scart cable for Sega Mega Drive I - Megadrive

Audio: Mono
  • Stéréo
  • Mono
Forced 4/3: Non merci
  • Non merci
  • Oui
Extra length: Non merci
  • Oui
  • Non merci
Last items in stock

Premium quality RGB scart cable made by Otaku's Store

- The cable is compatible with the Mega Drive I PAL & JAP, and also with Genesis I console
- An RC circuit (220µF/75 Ohms) is installed on the RGBS signals
- The synchro is native Csync type

- Cable length is 1.7M
- The Cable has excellent quality shielding (braided)
- Cable design is durable
- An anti-pull grommet is installed on the scart connector side (and connector side on some cables)
- All scart ground pins are wired
- The components used are quality and branded items, Panasonic, Nichicon, Samsung, Rubycon, Lelon...
- An identification label is present on the scart plug
- Our cables are assembled in France
- Product guaranteed for 2 years

Compatible with
- TVs equipped with a Euro scart input
- Scart to VGA/HDMI/YUV converters
- Framemeister XRGB type RGB converters (with adapter for EURO scart)
- The OSSCs (the configuration of this interface is sometimes a bit complex)

Note: A good quality RGB cable associated with a good quality CRT TV / pro monitor is currently the best option for enjoying the video rendering of retro consoles

In a few words, synchro? the RGB? The resolution ? What is it ? => See this page

Mono/Stereo Audio: The Mega Drive deliver mono sound by default, we offer a stereo version cable with an extension and a gold 3.5mm jack. This allows you to enjoy the stereo sound at the headphone output of the console (front) and redirect it to the scart plug. If the jack is not plugged in, no sound will be sent to the TV
Forced 4/3: Mainly useful with CRT TVs with differentiated  display 16/9 - 4/3. Without this option, the TV may display an image in 16:9 by default, the image will then be flattened (need to be manually forced with the remote control in 4:3 each time). 95% of rgb cables on the market do not have this option. This option is useless if your TV does not make a 16/9th – 4/3 differentiation (which is very likely) or if you are using our BNC BOX
Extra length: Cable with a length of 2.5M instead of 1.7M (made on request only, with additional delay)